Repair failures and restart loops
you cannot disable Automatic
Repair, but you can boot from installation media or Recovery Drive to fix
errors and make Windows 8 or 8.1 and windows 10 usable again.
The behavior can also be an indicator that Windows 8/8.1/10 does not have required drivers for a disk controller. You can then enter BIOS/UEFI and set your disk controller mode (aka SATA mode, RAID mode) to Standard (aka Standard IDE or SATA, Legacy) instead of AHCI or RAID (take note of the original setting first!). This will often ensure that Windows knows which drivers to use for booting from the system drive.
In case you have multiple hard drives, power off your computer and remove its power cord. Then disconnect drive cables from all hard disks other than the one where Windows is installed. Plug the power cord back in and see if this helps Windows to boot properly.
For More Information Call Lenovo Support: 855-517-2433
i used to be browsing net and happily came throughout this web page and discovered very thrilling stuff here. Its actually fun to study. I loved plenty. thank you for sharing this remarkable information. computer repair
ReplyDelete